This is a good choice for Mask Latex molds. It is harder than #1 Pottery Plaster and will hold detail longer with repeated castings. High green strength minimizes breakage during removal from the most intricate latex molds. A good selection for decreasing production time on masks. Also works well for quick mother molds. (Please note: This product is not for lifecasting of body parts.) FOR PROFESSIONAL USE ONLY!

White Hydrocal

$12.00

Quantity

he manufacture recommended mix-ratio of White Hydro Cal is: 45 parts water to 100 parts Hydro Cal by weight. The average setup time is 25-35 minutes when manually mixed. Please note that parts can be in grams, ounces or pounds etc.
This product is for making molds of industrial patterns only. When mixed with water, Ultra Cal undergoes a chemical reaction which causes it to harden and then slowly become very hot and highly alkaline (corrosive to skin like drain cleaner.) If mixed incorrectly this process can happen very rapidly. DO NOT attempt to make a mold enclosing any part of the body using this material. Failure to follow these instructions can cause severe chemical burns that may require surgical removal of affected tissue. Dust from products may cause eye, skin, nose, throat, or respiratory irritation. Use eye, skin, and respiratory protection in accordance with good industrial hygiene practices. Read MSDS of product for specific details.
Is ideal for both solid and hollow casting of lamp bases, figurines, moldings and general castings

Offers long workability; setting expansion twice that of molding plaster and pottery plaster

Has a great value to performance ratio

Achieves a stark, white color, making it ideal for accepting colorants

Sets 25-35 minutes after machine mixing

Requires 45 parts water by weight per 100 parts plaster.

COLLECTION AVALIABLE AT CHECKOUT

White Hydrocal

MIX RATIO:

WARNING

MAIN FEATURES